Task
Filling and repairing (holes, gaps, cracks)
Jointing plasterboard
Skimming plasterboard
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Gypsum, plaster board, old painted surfaces, cement, concrete, cellular concrete, primed wood
Overcoat with
Any type of filler, paint or wall coating.
Maximum recommended application thickness
Up to 5 mm.
Mixing rate
Ready to Use.
Ready to paint time
12 to 24 Hours
Working time
No limit
Application tools
Filling knife
Blade
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
1700.00
IAQ (Indoor Air Quality) classification
A+
Colour when dry
White
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with
Water.
Pack sizes