Gorilla Epoxy delivers a strong, long-lasting bond to both household and automotive repairs. The easy-to-use syringe dispenses an equal amount of resin and hardener, that when mixed together creates a permanent, durable and water resistant bond. The two-part, gap-filling Gorilla Epoxy formula sets in 5 minutes and easily bonds steel, aluminium, glass, wood, ceramic, tile and most plastics*. Plus it dries crystal clear, ensuring your projects look spotless. *Not recommended for use on polyethylene or polypropylene plastic or similar materials.
Features
- DRIES CRYSTAL CLEAR: Ensuring a spotless finish whatever the project
- GAP FILLING: Fills gaps and bonds uneven surfaces
- 5 MINUTE SET TIME: Gives ample time to reposition for the perfect fit
- WATER RESISTANT: Withstands moderate exposure to water
- EASY TO USE SYRINGE: Syringe dispenses even amounts of resin & hardener
- PREPARATION: All surfaces to be bonded should be clean and dry. To improve adhesion, roughen smooth surfaces with sandpaper before gluing. Ensure your work area is well-ventilated and protected from spills. Remove stir stick from middle of plunger. With nozzle pointing upward, snap the sealing cap off the syringe then eliminate any air by slowly pushing plunger until resin and hardener reach the tip.
- DISPENSE & MIX: Dispense resin and hardener onto clean, disposable surface ensuring both flow equally. Even amounts of resin and hardener can then be dispensed into a disposable mixing tray. The package blister can be used as a mixing tray. Stir the mixture for at least 20 seconds, until it is uniform. As you mix, you will notice that the epoxy warms up – this is a reaction that occurs as the resin and hardener combine.