Surface condition
Exterior
Task
Filling and repairing (holes, gaps, cracks)
Shaping and repairing without formwork
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Can be applied to all rough masonry
surfaces damp or dry: cement, concrete, breeze blocks, bricks and stone.
Overcoat with
Can be overcoated with any type of filler, paint or wall coating.
Do not coat directly with polyurethane paints nor epoxy solvent based paints.
Maximum recommended application thickness
No depth limitation
Ready to paint time
48 to 72 Hours
Working time
30 min
Application tools
Filling knife
Filling knife.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (EN 16-566): > 0.8 Mpa
Colour when dry
Light grey
Clean tools with
Water.