Surface condition
Exterior
Task
Filling and repairing (holes, gaps, cracks)
Application method
Manual
Time between coats
As soon as the filler is dry
Surfaces
Painted or unpainted substrates: gypsum plaster, cement, concrete, breeze blocks, bricks, stones, old painted surfaces, cellular concrete
Overcoat with
All types of waterborne or mineral paints: waterproofing coatings and Toupret exterior fillers. Do not cover straight over with polyurethane or solvent-based epoxy paints, unless primed with a waterborne exterior paint
Maximum recommended application thickness
No depth limitation
Ready to paint time
1 Hour
Working time
No limit
Application tools
Filling knife
Filling knife.
Trowel.
Recommended temperature and humidity for application
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%
Adhesion
Adhesion filler/substrate (EN 16-566): > 0.8 Mpa
Colour when dry
Light grey
Clean tools with
Water.